GLOSSARY Accelerator Position Sensor (APS) A potentiometer sensor that indicates the position of the throttle pedal. Catalytic Converter An antipollution device in the exhaust system that contains a catalyst for chemically converting some pollutants in the exhaust gases (carbon monoxide, unburned hydrocarbons, and oxides of nitrogen) into harmless compounds. Actuator A device that performs work in response to an electrical input signal. Charge Air Dense, pressurized, heated air discharged from the turbocharger. Aeration The entrainment of gas (air or combustion gas) in the coolant or lubricant. Controller Area Network (CAN) A J1939 high speed communication link.
Ambient Temperature The environmental air temperature in which a unit is operating. Coolant A fluid used to transport heat from the engine to the radiator. American Trucking Association (ATA) Datalink A serial datalink specified by the American Trucking Association and the SAE. Crankcase The housing that encloses the crankshaft, connecting rods, and associated parts. Analog Signal A continuously variable voltage. Crankshaft Position (CKP) Sensor A magnetic pickup sensor that determines crankshaft position and speed.
Barometric Absolute Pressure (BAP) Sensor A variable capacitance sensor which, when supplied with a 5 volt reference signal from the ECM, produces a linear analog voltage signal indicating atmospheric pressure. Duty Cycle A control signal that has a controlled on/off time measurement from 0 to 100%. Normally used to control solenoids. Boost Pressure The pressure of the charge air leaving the turbocharger. Electronic Control Module (ECM) An electronic processor that monitors and controls the engine. Camshaft Position (CMP) Sensor A magnetic pickup sensor that indicates engine speed and camshaft position.
EGR Cooler A cooler that allows heat to dissipate from the exhaust gasses before they enter the EGR Valve. CAN 1 A data link between the vehicle modules and ECM. EGR Valve A valve that regulates the flow of exhaust gasses into the intake manifold. CAN 2 The private link between the ECM and IDM. 106 International ® VT 275 V6 Engine