Cummins — 3666003

Troubleshooting Overview C Series Page TS-76 Section TS - Troubleshooting Symptoms Lubricating Oil Consumption Excessive This is symptom tree t102 Cause Correction STEP 1 Verify the oil consumption rate ............. Check the amount of oil added versus the hours of operation. OK Go To Next Step STEP 2 External engine leak ............. Inspect the engine and its components for seal, gasket, tappet cover, oil cooler, or draincocks leaks. OK Go To Next Step STEP 3 Crankcase oil level above specification ............. Check dipstick calibration. If there is too much oil in the crankcase, drain the oil to within specification. Refer to Procedure 007-009 and 007-037.

OK Go To Next Step STEP 4 Crankcase ventilation system is plugged ............. Check and clean the crankcase breather and vent tube. Refer to Procedure 003-018. OK Go To Next Step Change the oil and filters. Refer to Procedure 007-013. Use the oil type recommended in Section V of the engine operation and maintenance manual. STEP 5 Lubricating oil does not meet specifications for ............. operating conditions OK Go To Next Step STEP 6 Lubricating oil cooler is leaking ............. Check the lubricating oil cooler for coolant leaks. Refer to the Lubricating or Transmission Oil in the Coolant Symptom.

OK Go To Next Step STEP 7 Turbocharger leaking lubricating oil to the air Inspect the air crossover tube for evidence of lubricating oil transfer. Refer to Procedure 010-019. intake or exhaust ............. OK Go To Next Step STEP 8 Air compressor is pumping lubricating oil into the ............. Check the air lines for carbon buildup and lubricating oil. Refer to Procedure 012-003. air system OK Go To Next Step