Cummins — 3666003

C Series Bearings, Main Section 1 - Cylinder Block - Group 01 Page 1-15 Preparatory Steps To reduce the possibility of personal injury, avoid direct contact of hot oil with your skin. WARNING Some state and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity. Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations. WARNING Drain the lubricating oil. Refer to Procedure 007-037. Remove the lubricating oil pan and gasket. Refer to Procedure 007-025. Remove NOTE:

Before removing the main bearing caps, make sure that the caps are clearly marked for their location on the lubricating oil cooler side of the main bearing cap. NOTE: Do not pry on the main caps to free them from the cylinder block. Use two of the main bearing cap bolts to “wiggle” the main cap loose. Try not to damage the bolt threads.