Cummins — 3666003

C Series Camshaft Gear (Camshaft Removed) Section 1 - Cylinder Block - Group 01 Page 1-41 Inspect for Reuse Inspect the camshaft gear for cracked, chipped, or broken teeth. NOTE: If the fretting, burrs, or raised material can not be removed with Scotch-Brite 7448, Part No. 3823258, replace the camshaft gear. Inspect the camshaft gear bore for fretting or burrs and the keyway for burrs. Remove burrs with Scotch-Brite 7448, Part No. 3823258. NOTE: If the keyway is damaged or the burrs can not be removed, the camshaft gear must be replaced. Measure the camshaft gear bore inside diameter.

Camshaft Gear Bore Inner Diameter mm in 41.48 MIN 1.633 41.51 MAX 1.634 Inspect the camshaft nose for fretting or burrs. NOTE: If fretting or burrs can not be removed with Scotch-Brite 7448, Part No. 3823258, the camshaft must be replaced.