Cummins — 3666003

C Series Rocker Lever Section 3 - Rocker Levers - Group 03 Page 3-7 Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury. WARNING Use compressed air to dry the parts after rinsing in clean hot water. NOTE: The pedestals are made from powdered metal and will continue to show wetness after they have been cleaned and dried. Inspect for cracks and excessive wear in the bore and the contact surface of the valve stem. Measure the rocker lever bore. Rocker Lever Bore Diameter mm in 22.301 MAX 0.878 Measure the rocker lever shaft diameter. Rocker Lever Shaft Diameter mm in 22.199 MIN 0.874