Cummins — 3666003

Rocker Lever Cover C Series Page 3-10 Section 3 - Rocker Levers - Group 03 Use clean engine oil to lubricate the threads and under the heads of the pedestal capscrews. Install the retaining clamps and capscrews. CAUTION To prevent damage to the rocker lever and push rod, make sure the adjusting screw ball is positioned in the socket of the push rods when tightening. Tighten the pedestal capscrews. Torque Value: 55 N•m [ 41 ft-lb ] Finishing Steps Adjust the intake and exhaust valve lash. For C Series diesel engines, refer to Procedure 003-004 in the Troubleshooting and Repair Manual, C Series Engines, Bulletin 3666003.

For C Series gas engines, refer to Procedure 003-004 in the Troubleshooting and Repair Manual, C8.3G, C Gas Plus, and L Gas Plus Engines, Bulletin 3666206. Install the rocker lever cover. Refer to Procedure 003-011. Install the crankcase breather tube and hose. Refer to Procedure 003-011. Rocker Lever Cover (003-011) Preparatory Steps Remove the crankcase breather tube and hose. Refer to Procedure 003-018. Remove the air crossover tube (off-highway vehicles). Refer to Procedure 010-019. Remove the capscrew from the support bracket for the turbocharger wastegate actuator hose (on-highway vehicles).