Cummins — 3666003

C Series Fuel Supply Lines Section 6 - Injectors and Fuel Lines - Group 06 Page 6-11 Inspect for Reuse Inspect the fuel drain lines for cracks and/or damage. Inspect the fuel drain line banjo connections. NOTE: The banjo connection seals must be discarded when removed. The seals must not be reused. Install Install the fuel drain manifold in the reverse order of removal. Torque Value: Filter Head Banjo 15 N•m [ 133 in-lb ] Injector Banjo 9 N•m [ 80 in-lb ] Fuel Supply Lines (006-024) Preparatory Steps Low Pressure Fuel Line(s) Clean any debris from the fittings. NOTE: Thoroughly clean all fittings and components before removal.

Make sure that the debris, water steam, or cleaning solution does not get inside the fuel system.