Injector Supply Lines (High Pressure) C Series Page 6-28 Section 6 - Injectors and Fuel Lines - Group 06 Clean When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury. WARNING WARNING Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury. Wash the fuel lines in clean solvent. Dry the fuel lines with compressed air. NOTE: Make sure all paint chips are removed when cleaning the fuel lines.
Inspect for Reuse Inspect the high-pressure fuel lines for obvious damage, such as lines that have been bent to facilitate injector removal. NOTE: High-pressure pulses expand and contract the injector lines that result in internal flaking at the bent areas. Bent lines must be replaced. Inspect the high-pressure fuel lines for cracks at both ends.