Lubricating Oil Pump C Series Page 7-16 Section 7 - Lubricating Oil System - Group 07 Inspect the plunger and plunger bore. Polished areas on the plunger and bore are acceptable. Verify that the plunger moves freely in the bore. Install Install a new sealing o-ring on the threaded plug and lubricate with clean engine oil. Install the pressure regulator assembly. Torque Value: 80 N•m [ 59 ft-lb ] Lubricating Oil Pump (007-031) Preparatory Steps Remove the vibration damper/crankshaft pulley. Refer to Procedure 001-052. Remove the front drive belt. Refer to Procedure 008-002. Remove the front gear cover. Refer to Procedure 001-031.