C Series Coolant Filter Section 8 - Cooling System - Group 08 Page 8-3 Install The belt tensioner is spring-loaded and must be pivoted away from the drive belt. Pivoting in the wrong direction can result in damage to the belt tensioner. CAUTION Lift the tensioner to install the drive belt. Coolant Filter (008-006) Remove WARNING Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50°C [120°F] before removing the pressure cap. Heated coolant spray or steam can cause personal injury. Close the coolant inlet and outlet valves on the coolant filter head by rotating the valves clockwise .
A small amount of coolant can leak when servicing the coolant filter with the shutoff valve in the OFF position. To reduce the possibility of personal injury, avoid contact with hot coolant. WARNING Coolant is toxic. Keep away from children and pets. If not reused, dispose of in accordance with local environmental regulations. WARNING Use coolant filter wrench, Part Number 3376807, to remove the coolant filter. Discard the coolant filter. Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50°C [120°F] before removing the pressure cap. Heated coolant spray or steam can cause personal injury.
WARNING Turn the shutoff valve to the OFF position by rotating the knobs in a clockwise direction until the valves are fully closed.