Cummins — 3666003

C Series Fan, Cooling Section 8 - Cooling System - Group 08 Page 8-41 Install the four capscrews, fan, and spacer. Torque Value: 24 N•m [ 212 in-lb ] Torque Value: 43 N•m [ 32 ft-lb ] Fan, Cooling (008-040) Inspect for Reuse WARNING Do not rotate the engine by pulling or prying on the fan. The fan blade(s) can be damaged and cause the fan to fail and cause personal injury or property damage. Use the accessory drive shaft or the crankshaft barring tool to rotate the crankshaft. A visual inspection of the cooling fan is required daily. Check for cracks, loose rivets, and bent or loose blades. Check the fan to make sure it is securely mounted. Tighten the capscrews, if necessary.

Do not straighten a bent fan blade or continue to use a damaged fan. A bent or damaged fan blade can fail during operation and cause personal injury or property damage. WARNING