Cummins — 3666003

C Series Sea Water System Diagnostics Section 8 - Cooling System - Group 08 Page 8-61 Sea Water System Diagnostics (008-103) General Information Typical sea water cooling system 1. Grate-type strainer located on the bottom of the boat hull 2. Vessel bottom/hull 3. Sea water inlet valve 4. Hose 5. Sea water strainer 6. Sea water pump 7. Fuel cooler 8. Aftercooler 9. Transmission oil cooler 10. Heat exchanger 11. Sea water outlet. Initial Check Locate and verify that the sea water inlet valve is in the full open position. If it is closed or partially closed, open the valve and recheck the engine temperature. Inspect the sea water strainer for foreign objects that could restrict the water flow.

Some strainers have clear covers for easy inspection. If the strainer has to be opened for inspection, refer to Procedure 008-067.