Exhaust Manifold, Dry C Series Page 11-2 Section 11 - Exhaust System - Group 11 Inspect for Reuse Inspect the exhaust manifold for cracks, burnout, or damaged threads in the bosses. Install Assemble the exhaust manifold capscrews, lock plates, and new gaskets onto the exhaust manifold. Apply a thin coat of anti-seize compound, Part Number 3824879, to the capscrew threads. NOTE: The exhaust manifold gaskets are nondirectional. Install the exhaust manifold, new gaskets, and lock plates. Torque Value: 43 N•m [ 32 ft-lb ] Follow the tightening sequence shown in the illustration. Apply anti-seize compound to the exhaust manifold bolts upon assembly.
Three-Piece Manifold If required, the end sections can be oiled, allowing the center section to slide. NOTE: The manifolds are oxide-coated and can leak slightly on start-up. It will seal within the first few hours of use.