Cummins — 3666003

C Series Air Governor (Air Compressor Will Not Pump) Section 12 - Compressed Air System - Group 12 Page 12-9 Finishing Steps Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last. WARNING WARNING Coolant is toxic. Keep away from pets and children. If not reused, dispose of in accordance with local environmental regulations. Install the oil supply line. Refer to Procedure 012-110 in Section 12. Install the air inlet and air outlet connections to the air compressor.

Install the air governor or air governor signal line, if necessary. Refer to the OEM service manual. Install the air compressor coolant lines. Refer to Procedure 012-004 in Section 12. Install the air lines. Install any attachments to the rear of the air compressor. Refer to the OEM service manual. Fill the engine cooling system. Refer to Procedure 008-018 in Section 8. Connect the batteries. Refer to the OEM service manual. Operate the engine to activate the air compressor and check for leaks. Air Governor (Air Compressor Will Not Pump) (012-017) Test Remove the air governor hose from the air compressor unloader body.