Lubricating Oil System - Overview C Series Page F-16 Section F - Familiarization If the oil cooler element ruptures, the oil pressure will force oil into the cooling system. Oil in the coolant can be visible when the radiator cap is removed. As the oil is forced into the cooling system, coolant will be displaced through the radiator overflow. Leaks can be verified by pressure testing the oil cooler element with lubricating oil cooler pressure test kit, Part No. 3823876. Apply 483 kPa [70 psi] air pressure to the element to check for leaks. High intake air restriction and worn or damaged seals in the turbocharger can allow oil to leak into the air crossover pipe and be burned in the engine.
This condition can be verified by removing the air crossover tube and looking for oil. Inadequate sealing of the piston rings will result in combustion gas and oil droplets being blown out the crankcase breather tube and/or consumed by the engine. Refer to Procedure 014-010 for measuring crankcase gases (blowby).