Cummins — 3666003

C Series Crankcase Blowby, Measure Section 14 - Engine Testing - Group 14 Page 14-31 To reduce the possibility of personal injury, keep hands, long hair, jewelry, and loose fitting or torn clothing away from fans and other moving parts. WARNING WARNING Troubleshooting presents the risk of equipment damage, personal injury, or death. Troubleshooting must be performed by trained, experienced technicians. Do not operate the engine with valve (A) open and valve (B) closed for more than 1 minute. Monitor the amount of oil accumulating in the bucket. The engine can run out of lubricating engine oil and severe engine damage will occur. CAUTION Continue operating at rated speed and load.

Open valve (A) and close valve (B). Record the blowby pressure reading. CAUTION Do not operate the engine for more than 1 minute. Monitor the amount of oil accumulating in the container. The engine can be run out of lubricating engine oil and severe engine damage will result. Alternate Turbocharger Isolation Method: With the turbocharger oil drain line disconnected from the cylinder block, run the turbocharger drain line into a large container. Plug the turbocharger oil drain port in the cylinder block. Operate the engine at rated speed and under load by either:

For engine testing, a chassis dynamometer or engine dynamometer A stall speed test (for engines equipped with automatic transmissions only ). Record the peak blowby pressure measurement.