Cummins — 3666003

Flywheel Housing, REPTO C Series Page 16-22 Section 16 - Mounting Adaptations - Group 16 Remove the REPTO oil supply line. Remove the oil seal capscrews, the oil seal, and the gasket. To gain access to the housing capscrews, use a drift to drive the cup plugs straight through into the housing. NOTE: Do not attempt to back the plugs out or rotate the plugs out. The cup plug bore will be damaged and oil leakage will occur. Retrieve the plugs from inside the housing. Install two crankshaft locator studs, Part Number 3822784, into the crankshaft flywheel mounting flange 180 degrees apart. Remove the crankshaft drive gear.