C Series Cooling System - Overview Section F - Familiarization Page F-23 Cooling System - Overview (008-999) Coolant Blending and Mixing Check the antifreeze concentration. Use ethylene-glycol base antifreeze to protect the engine to -37°C [-35°F] throughout the year. Antifreeze is essential in all climates. It broadens the operating temperature range by lowering the coolant freezing point and by raising the coolant boiling point. CAUTION Inadequate concentration of the coolant additive can result in major corrosive damage to cooling system components. Overconcentration can cause formation of "gel" that can cause restriction, plugging of coolant passages, and overheating. NOTE:
If the engine coolant is changed, the coolant filters must also be changed. The cooling system must contain the proper coolant additive units to provide the best chemical protection. Refer to the Engine Specifications (Section V). DCA4 Test Kit: Use only DCA4 coolant test kit, Fleetguard® Part No. CC-2626, to check the coolant additive concentration in the cooling system. Fleetguard® DCA4 Service Filters and Liquid Precharge The correct coolant filter to be used is determined by the total cooling system capacity and other operational factors. Refer to the DCA4 Maintenance Guide in Engine Specifications (Section V) for the correct selection of the filter.