C Series Cup Plug Section 17 - Miscellaneous - Group 17 Page 17-1 Cup Plug (017-002) Remove Do not allow metal shavings to fall in the engine when drilling a hole in the cup plug. Damage to engine components can occur. CAUTION Use a center punch to mark the cup plug for drilling. Drill a 1/8-inch hole into the cup plug. Use a dent puller to remove the plug. Clean Thoroughly clean the cup plug hole using Scotch-Brite™, or equivalent. Use spray cleaner, Part Number 3375433, or equivalent, to clean the bore for the final time. Inspect for Reuse Inspect the cup plug bores for damage.