HONDA MPE MOTORCYCLE & POWER EQUIPMENT ACN.006 662 862 Service Bulletin BULLETIN NO : SBMA0105 BULLETIN TO : ALL MARINE DEALERS ATTENTION : SERVICE MANAGER AND All RELEVANT STAFF FROM : Service Department DATE : December 12 th 2001 SUBJECT : BF 20 to 130 Mount frame Gaskets Ladies and Gentlemen, It has come to our attention that in some case the engine may over heat while being driven at a constant speed. This may be due to sediment building up inside the engine blocking the coolant passages leading to overheating. The models that may be affected are the BF 20 through to the BF130. Symptom: The engine may overheat under normal operating conditions while being driven at a constant speed.
The engine tell-tale may also be constantly block. Cause: The diameter of the coolant supply passage in the mount frame gasket is not adequate to pass large particles through it. Countermeasure: To prevent the coolant from stagnating, the diameter of the coolant supply passage was expanded. This allows larger particles to pass through the coolant system. This will mean the engine block will need to be removed to fit the new mount case gasket. Warranty Application: New outboard warranty applies only. Fault code : 091 FRT : See parts list. Tony Shaw Marine Technical/training Officer PLEASE ENSURE ALL RELEVANT STAFF ARE AWARE OF THIS BULLETIN AND ITS CONTENTS. ........................
........................ .............................. .......................... SERVICE MANAGER PARTS MANAGER SALES MANAGER DEALER PRINCIPAL