honda — 2000 -1996

HONDA MPE MOTORCYCLE & POWER EQUIPMENT ACN.006 662 862 Service Bulletin BULLETIN NO : SBMA0005 BULLETIN TO : ALL MARINE DEALERS ATTENTION : DEALER PRINCIPAL, SERVICE MANAGER, SALES MANAGER & ALL RELEVANT STAFF FROM : Marine Service Department DATE : September 2000 SUBJECT BF75/90A1 TECHNICAL CHANGES. Ladies and Gentlemen, Honda Marine have announced some changes to the BF75/90 range of outboard engines. As many of the internal engine components are the same as the Civic car engine when the car engine was upgraded so was the outboard engine. The differences are incorporated in the new models manufactured in Japan since June.

Australia is starting to distribute these units now and the changes and benefits are highlighted below. Please note than the main specifications such as engine output (horsepower and torque) will remain unchanged, as does the current factory warranty. Identifying the new models from the previous units is simple this example illustrates, BF90AX LRTD is now BF90A1 LRTD. 1/. Outline of changes to new models of BF75/90 A1. 1 Engine crankshaft. • The diameter of the crankshaft at the upper side of the crankshaft. • Width of the connecting rod pin. • Change in oil seals • Connecting rods have altered also. • Engine block is revised. • Pulleys and rotors have been upgraded.

2 Carburettor differences. • Cam, throttle opener angle has changed. • Dashpot valve has benefited by an increase in inside diameter of the joint. This will result in better acceleration response. • The carburettor will also benefit from some internal changes. 3 Gearcase assembly changes. • Clutch shifter has been upgraded, it can also be retro fitted to the earlier AX engines. • Forward and reverse bevel gears have been revised and can also be retro fitted to the earlier AX engines. • Propeller shaft itself has been revised also and can be installed into the earlier AX engines.