HONDA MPE MOTORCYCLE & POWER EQUIPMENT ACN.006 662 862 Service Bulletin BULLETIN NO : SBPE200240 BULLETIN TO : MARINE DEALERS ATTENTION : Marine Service Department FROM : Service Department DATE : August 2002 SUBJECT : BF 175/200/225 (Broken tooth on forward gear) Ladies and Gentlemen, Due to excessive free play in the thrust direction of the propeller shaft, the forward bevel gear may leave the correct position in low-load conditions. At this time the gear may run in an incorrect contact position causing the gear teeth to take a large amount of stress.
(This modification should be carried out when the unit comes in for service!) Symptom The gear case may become noisy due to a broken tooth or the gear oil may be contaminated by metal particles before the maintenance schedule (100 Hours). Cause Excessive free play in the thrust direction of the propeller shaft. Countermeasure The propeller thrust clearance has changed on standard rotation gear cases: From 0.50 ± 0.20 mm => 0.35 ± 0.05 mm The propeller thrust clearance is the same as specified on counter rotation gear cases: 0.25 ± -0.05mm