HONDA MPE MOTORCYCLE & POWER EQUIPMENT ACN.006 662 862 Service Bulletin BULLETIN NO : SBPE200238 BULLETIN TO : MARINE DEALERS ATTENTION : Marine Service Department FROM : Service Department DATE : August 2002 SUBJECT : BF 40/50 A2 Ladies and Gentlemen, The new BF 40/50 A2 model no longer has a throttle position switch in the control box. This means that there is no longer a shallow water drive alarm, which was the alarm that went off if more than 30% of throttle was used and the engine is tilted up. If you have any customers that are up dating their current BF 40 or 50 please point out that this feature has been removed. The owner’s manual has already been changed for this new model.
If you wish to fit the current control boxes you will find that the fourth wire for the trim gauge will not have a wire connection for it. This means when setting up any BF 40A2 or 50A2 please mark the frame number on the control and accessories boxes. This will avoid any confusion with the new and old parts. At this point in time only the genuine trim gauges can be used on these units because the trim control unit is no longer on the engine, it is incorporated into the gauge. The R & D department are working on a kit to fit to the engine so that the old style or after market gauges can be fitted. We will let you know the part number and price as soon and they are available.
* The new style control box starts from the frame numbers below. BF 40 A2 BAYL-3221532 and subsequent BAYL-3100445 and subsequent BF 50 A2 BAZS-3222752 and subsequent BAZL-3100576 and subsequent BAZU-3100088 and subsequent