HONDA MPE MOTORCYCLE & POWER EQUIPMENT ACN.006 662 862 Service Bulletin BULLETIN NO : SBMA200230 BULLETIN TO : Marine Dealers ATTENTION : DEALER PRINCIPAL, SERVICE MANAGER, SALES MANAGER & ALL RELEVANT STAFF FROM : Marine Service Department DATE : June 2002 SUBJECT : BF 75/90/115/130 Gear Oil Emulsified Ladies and Gentlemen, It has come to our attention that some gear cases may be found to have water entering through the top water seal. Symptom: The gear oil may be emulsified with water when checking or changing the gear oil. Cause Under normal conditions, the internal pressure will increase when the engine is operating due to friction and heat generated by rotation.
However, when engine speed drops or the temperature of gear oil decreases, negative pressure develops in the case causing water to enter through the water pump seals. Countermeasure To prevent water entry fit the improved water pump housing and water seal. Change gear oil and refill with 0.95 lt of oil. Water pump housing Water seals