SAFETY EVACUATING IN CASE OF FIRE If a fire breaks out, evacuate the machine in the following way: • Stop the engine by turning the key switch to the OFF po- sition if there is time. • Use a fire extinguisher if there is time. • Exit the machine. 518-E01A-0393 SA-393 BEWARE OF EXHAUST FUMES Prevent asphyxiation. Engine exhaust fumes can cause sick- ness or death. • If you must operate in a building, be sure there is ad- equate ventilation. Either use an exhaust pipe extension to remove the exhaust fumes or open doors and windows to bring enough outside air into the area. 509-E01A-0016 PRECAUTIONS FOR WELDING AND GRINDING SA-016 Welding may generate gas and/or small fires.
• Be sure to perform welding in a well ventilated and pre- pared area. Store flammable objects in a safe place before starting welding. • Only qualified personnel should perform welding. Never allow an unqualified person to perform welding. Grinding on the machine may create fire hazards. Store flammable objects in a safe place before starting grinding. After finishing welding and grinding, recheck that there are no abnormalities such as the area surrounding the welded area still smoldering. 523-E01A-0818 SA-818 S-27