Linde K10/K13 — K10 1.Spr. ab S.1

Einfahren in den Regalgang Automatikfahrt Entering the rack aisle Automatic travel Einfahren in den Regalgang Entering the rack aisle Drьcken der Taste "Hand-Auto" (1). Die Lampen (2) blinken abwechselnd. 1 Press key "Manual-Auto" (1). The lamps (2) light alternately. Anzeige im Display (3, z. B. Kanal : K 1) siehe Drahtsuche. Indication in the display (e. g. channel : K 1). See wire search. Das Fahrzeug ist am Ganganfang so mit- tig und parallel wie mцglich auf die Draht- nut aufzufahren. Gelingt dies nicht, ergibt sich ein Auffahr- winkel.

Je nach Auffahrwinkel (spitz oder stumpf, maximal 40°) wird automatisch ein entsprechendes Kurvenfahrprogramm angewдhlt, um das Fahrzeug entspre- chend der momentanen Situation auf kьr- zestem Wege auf die Induktionsspur zu bringen. Wenn eine Antenne die Induktionsspur erkannt hat, schaltet die Steuerung auf vorbereitende Regalfahrt um. Von nun an ist die Handlenkung ausgeschaltet. Mit Zweihand-Bedienung fдhrt das Fahrzeug in Positioniergeschwindigkeit auf die Spur auf, bis beide Antennen das Signal regi- strieren. The truck must be positioned centrally at the entrance to the aisle and aligned as closely parallel as possible to the wire groove.

Q If the driver is unable to achieve this, an approach angle is created. Depending on the approach angle (acute or obtuse, max. 40°), a suitable cornering program is auto- matically selected in order to return the truck to the induction track by the shortest possible route depending on the current situation. 2 PSA PSA Fehler If a sensor has recognized the induction track, the control switches over to prepa- ring rack travelling. From now on the manual steering is switched off. The truck moves onto the track at positioning speed with 2-hand-operation, until both sensors record the signal. 3 4 Die bis dahin blinkende grьne Lampe (2) schaltet auf Dauerlicht.

Das Fahrzeug beschleunigt auf die nun zulдssige maxi- male Geschwindigkeit. Q PSA PSA Fehler Q The flashing green lamp (2) switches to constant light. The truck accelerates to the allowed maximum speed. Automatikfahrt 5 Automatic travel For this purpose, the preselection key (3) on the left must be actuated and the con- trol lever on the right (4) deflected. If you wish the raise or lower the cab lift at the same time, both control levers must be deflected in the corresponding direction (for details of diagonal travel, see page 56) Dazu muЯ die Vorwahltaste (3) links betдtigt werden und der Bedienhebel rechts (4) ausgelenkt werden.

Soll gleich- zeitig der Kabinenhub gehoben oder gesenkt werden, sind beide Bedienhebel sinngemдЯ auszulenken (Diagonalfahrt, siehe dazu Seite 56). Q PSA Anciliary movements during automatic travel PSA Fehler Nebenbewegungen in Automatikfahrt As soon as the load suspension device (push/swivel forks) are no longer within the contour of the truck, it is only possible to travel at positioning speed, to be able to position the forks in the pallet. Sobald das Lastaufnahmemitte l (Schwenk- schubgabel) nicht mehr innerhalb der Fahrzeugkontur ist, kann das Fahrzeug nur noch in Positioniergeschwindigkeit gefahren werden, um die Gabel in der Palette zu positionieren. Display by (5).

Ancillary movements may only be carried out when at a standstill. Anzeige durch (5). Die Nebenbewegungen kцnnen nur im Stillstand ausgefьhrt werden. Ancillary movements include - Raising / lowering the initial lift - Turning the forks Die Nebenbewegungen sind: - Zusatzhub heben -senken - Shifting the forks - Gabel drehen 62 K10, K13 - Gabel schieben