Check Chassis Range! 0000 - Overall system/tractor B - Faults 115 T006640 Version 2 09-10-2009 F03 A039 - MFA, multifunction armrest not responding F08 Calibration taking too long (more than 30 seconds) Calibration code 4002 ( A039 - MFA, multifunction armrest) Calibration code 2401 ( B067 - Sensor, steering angle) F09 User terminated calibration with "ESC" F02 Calibrated values are faulty 919 .. 1001- 934 .. 1001- 922 .. 1001- 925 .. 1001- 928 .. 1001- 931 ..
1001- Fault code Cause Fault code Cause B - Faults Fault code Cause F01 Preliminary conditions for calibration not satisfied F08 Calibration taking too long (more than 30 seconds) F09 User terminated calibration with "ESC" F10 Plausibility of "centre position" calibration value F11 Plausibility of "left stop" calibration value F12 Plausibility of "right stop" calibration value F13 Plausibility of calibration values with each other Fault code Cause F01 Preliminary conditions for calibration not satisfied F02 Front wheels are not straight F03 Manual steering wheel actuation during calibration F06 No movement in direction "steering to left" F07 No movement in direction "steering to right" F08 Calibration taking too long F09 User terminated calibration with ESC F11 Plausibility:
Signal in direction "steering to left" F12 Plausibility: Signal in direction "steering to right" Fault code Cause F01 User terminated calibration with "ESC" F02 Pedal in rest position: Signal greater than allowed (22 mA) F03 Pedal in rest position: Signal smaller than allowed (2 mA) F04 Pedal fully depressed: Signal greater than allowed (22 mA) F05 Pedal fully depressed: Signal smaller than allowed (2 mA) F06 Calibrated min. and max.
values are too close together Minimum difference of 10 mA necessary F07 Calibration taking too long (more than 30 seconds) Fault code Cause F02 Calibrated values are faulty F03 A039 - MFA, multifunction armrest not responding F08 Calibration taking too long (more than 30 seconds) F09 User terminated calibration with "ESC"