Fendt 900 Vario COM III — 2 Calibration code 8001, 8002 (EPC rear)

I003578 Fig. 16. I003591 Fig. 17. I000760 Fig. 18. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- F08 Calibration taking too long (more than 30 seconds) If fault messages are displayed, the faults must be confirmed one by one. F03 Important: The following preparatory steps must be carried out F09 O.K. appears N OTE : nition again!) met, an message appears N OTE : Confirm warning and fault messages shown on the A007 instrument panel with the "ESC" button.

F02 0000 - Overall system/tractor F - Setting and calibrating Fault code 8001 = calibration code FXX 236 T000336 Version 3 21-04-2009 Hand brake applied Start engine F - Setting and calibrating Fault code Cause F02 Calibrated values are invalid F03 A039 multifunction armrest failing to report F08 Calibration taking too long (more than 30 seconds) F09 User terminated calibration with ESC