0000 - Overall system/tractor F - Setting and calibrating I000951 Fig. 64. I000952 Fig. 65. I000953 Fig. 66. I003578 Fig. 67. 249 T000355 Version 3 21-04-2009 Push crossgate lever to left (do not exert excessive pres- sure against spring Hold crossgate lever Push crossgate lever forwards (do not exert excessive pressure against spring) Hold crossgate lever Pull crossgate lever backwards (do not exert excessive pressure against spring) Hold crossgate lever If calibration is completed without errors, O.K. appears and the new sensor settings are saved. N OTE : Settings are only transferred when the ignition key has been turned to "0" position.
(Wait for at least 15 seconds before switching on the ig- nition again!) 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Press "Return" to confirm this position Press "Return" to confirm this position Press "Return" to confirm this position F - Setting and calibrating