0000 - Overall system/tractor F - Setting and calibrating I000760 Fig. 81. I000761 Fig. 82. I000976 Fig. 83. 255 T000368 Version 2 21-04-2009 Once the input code has been confirmed, the tractor will raise and lower automatically! 6 Calibration code 7666 (front axle suspension) If fault messages are displayed, the faults must be confirmed one by one. Important: The following preparatory steps must be carried out. Press "ESC" to confirm the warning and fault messages displayed on the A007 instrument panel Press one of the buttons repeatedly until the symbol (A) flashes The second main menu appears in the multiple display Press one of the buttons repeatedly until the symbol (A) flashes 919 ..
0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Press "Return", the first main menu appears in the multiple display Press "Return", the second main menu appears in the multiple display 8. Calibrating the front axle suspension (7666) W ARNING : Calibration operation: Position the tractor on a flat, level surface Press "Return" to confirm Hand brake applied Start engine F - Setting and calibrating