I000760 Fig. 88. I000761 Fig. 89. I000980 Fig. 90. 7 Calibration code 2401 (steering angle sensor) (calibration only possible Switch Auto-Guide standby button to off (LED off) or to partial activation (LED flashes) 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- If fault messages are displayed, the faults must be confirmed one by one. N OTE : Calibration procedure from end-of-line program EOL 7.60 or higher 9. Calibrating the steering angle sensor (2401) Important: The following preparatory steps must be carried out.
Press "ESC" to confirm the warning and fault messages displayed on the A007 instrument panel Press one of the buttons repeatedly until the symbol (A) flashes The second main menu appears in the multiple display Press one of the buttons repeatedly until the symbol (A) flashes for tractors with Auto-Guide) Press "Return", the first main menu appears in the multiple display Press "Return", the second main menu appears in the multiple display Press "Return" to confirm 0000 - Overall system/tractor F - Setting and calibrating 258 T000377 Version 3 21-04-2009 Engine is running F - Setting and calibrating