0000 - Overall system/tractor A - General 23 21-04-2009 17 l/min (at an engine speed of 1000 rpm) 35 l/min (at an engine speed of 2000 rpm) 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Tractor type 922 Vario 924 Vario 927 Vario 930 Vario 933 Vario 936 Vario 4WD clutch Wet multiple-disc clutch/electro-hydraulically actuated/ selectable under load Auto:
4WD automatically disengages at speeds higher than 20 km/h and re-engages at speeds below 20 km/h 4WD is automatically disengaged when the steering angle is greater than 25°, and re-engages below 25° 100% 4WD clutch Axle point 40 km/h version (18 t permissible overall weight) Flange/stub shaft 50 km/h version (15 t permissible overall weight) Flange/stub shaft 50 km/h variant (18 t permissible overall weight) Flange/stub shaft 60 km/h variant (16 t permissible overall weight) Flange Technical specification extract: front axle Front axle type (FENDT) Front axle with individual wheel suspension Permissible axle load 8 t Transmission oil (see also:
fuels and lubricants in Operating Manual) Fendt Extra Trans 10W-40 Version with front axle brake (2-circuit brake) (wet multiple-disc brake, pneumatically actuated) Max. permissible drive speed 40 Km/h und 50 Km/h(18 t permissible overall weight) / 60 Km/h (16 t permis- sible overall weight) Version without front axle brake (1-circuit brake) (Note: With this version, the tractor is decelerated via the rear wheel brake and by engaging 4WD) Max. permissible drive speed 40 Km/h(18 t permissible overall weight) / 50 Km/h (15 t permissible overall weight) Front axle housing – transmission oil lubrication Variant: 2-circuit brake with/without front PTO Forced feed lubrication Hydraulic pump:
16cc/r with 25 bar at pressure-limiting valve Drive transmission: 0.896 Hydraulic pump delivery rate: 17 l/min (at an engine speed of 1000 rpm) 35 l/min (at an engine speed of 2000 rpm)