Fendt 900 Vario COM III — 16 Calibration code 4009 (turbo-clutch function)

I000760 Fig. 172. I000761 Fig. 173. I000988 Fig. 174. Hand brake applied. Caution: the tractor may set in motion during the calibration operation 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Engage transmission travel range II via the switch in the A039 multifunction armrest 16 Calibration code 4009 (turbo-clutch function) Engine speed drops to approx. 800 rpm during the calibration operation If fault messages are displayed, the faults must be confirmed one by one. 17. Calibrating the turbo-clutch function (4009) Important:

The following preparatory steps must be carried out. Press "ESC" to confirm the warning and fault messages displayed on the A007 instrument panel Press one of the buttons repeatedly until the symbol (A) flashes The second main menu appears in the multiple display Press one of the buttons repeatedly until the symbol (A) flashes Press "Return", the first main menu appears in the multiple display Press "Return", the second main menu appears in the multiple display Transmission oil temperature approx.

40°C Tractor stationary (below 0.01 km/h) Press "Return" to confirm Engine speed 1100 rpm +/- 40 0000 - Overall system/tractor F - Setting and calibrating 290 T000402 Version 3 21-04-2009 Start engine F - Setting and calibrating