Fendt 900 Vario COM III — 6 Adjusting and fitting the pinion shaft

1010 - Transmission/differential G - Repair I002697 Fig. 79. I002698 Fig. 80. I002699 Fig. 81. I002700 Fig. 82. 31 T000825 Version 1 07-11-2007 Press the oiled bearing outer ring of the taper roller bear- ing (14) into the transmission housing as far as it will go Press the oiled bearing outer ring of the taper roller bear- ing (11) into the transmission housing as far as it will go Oil the taper roller bearing (14) and insert the pre-assem- bled pinion shaft into the transmission housing; thread the constant 4WD (spur gear) at the same time 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 ..

0101-1000 925 .. 0101-1000 931 .. 1001- Fit the circlip (12) G - Repair