I003439 Fig. 50. I003434 Fig. 51. I003440 Fig. 52. I003441 Fig. 53. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- 2 Assembling tractor - engine and clutch housing N OTE : Ensure that the teeth of the drive shaft and the 4WD shaft fit the bushes. If these are not aligned, turn either the engine of the rear axle shaft Present the engine to the tractor frame Face the engine onto the clutch housing, ensuring that no hydraulic piping is snagged Tighten M12 and M16 bolts Tightening torque: M12 = 120 Nm Tightening torque:
M16 = 315 Nm 1050 - Transmission/housing G - Repair Tighten the M20 bolts Tightening torque: 580 Nm 20 T001195 Version 1 07-11-2007 G - Repair