1070 - Transmission / Brake system F - Setting and calibrating I002468 Fig. 1. I002469 Fig. 2. I001760 Fig. 3. 17 T000804 Version 2 21-04-2009 Position the tractor on a level surface and ensure it cannot move Unscrew the hand brake release screw on the Tristop cyl- inder by turning counterclockwise until it becomes notice- ably more difficult to turn, then tighten as far as it will go with a spanner (SW24) To release the air hoses, push the plastic ring back and withdraw the hose 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 ..
1001- 1 Adjusting rear wheel brake Unplug the air hoses and sensors Apply the hand brake Remove the rear wheel Preliminary work: F - Setting and calibrating