Fendt 900 Vario COM III — 1 Assembling and removing live PTO clutch

I003657 Fig. 20. I003658 Fig. 21. I003659 Fig. 22. I003660 Fig. 23. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- If it has been removed: Mount the locating ring (5) on the internal toothed disc carrier (6). Coat the threads of the socket head cap screw (4) with X 903.050.084 synthetic bonding agent. Tighten the socket head cap screws (4). Fit the pre-assembled internal toothed disc carrier (6). Measure and note the distance between the front side of the shaft (35) and the internal toothed disc car- rier (6). E.g.

23.2 mm Set up the X 899.980.145 jig and tighten the belleville springs (9). Fit the ring halves (30). In the case of ring halves (30) bevelled on one side, the bevel faces the internal toothed disc carrier (6) Dismantle the X899.980.145 jig. Measure and note the distance between the front side of the shaft (35) and the internal toothed disc carrier (6). E.g. 25.8 mm If the belleville package (9) is pressed together by ap- prox. 2.5 mm it will have the correct preload. Determine the preload of the belleville springs (9) In the event of deviations, correct it using shims (8). 1220 - Transmission / Live PTO G - Repair 18 T001259 Version 1 07-11-2007 N OTE : See also:

Technical drawing G - Repair