Fendt 900 Vario COM III — 2 Assembling and dismantling live PTO clutch and gears

I003642 Fig. 43. I003643 Fig. 44. I003651 Fig. 45. I003683 Fig. 46. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Unscrew all fixing bolts and nuts. Remove the plugs from the threaded bores and screw in two jack screws M12 (arrows). Secure the housing cover in the hoist and release the housing cover. N OTE : See also: Chapter 1220; Register G – Assembling and dismantling live PTO clutch Pull out the tapered roller bearing (101) with a standard extraction tool. Remove the locating ring. W ARNING : Do not walk or stand under sus- pended loads! N OTE :

Take note of the shim (1). The washer (1) is used to adjust the bearing play Remove the housing cover (with rear PTO). Dismantling the PTO transmission 1220 - Transmission / Live PTO G - Repair Dismantle the live PTO clutch 28 T001262 Version 1 07-11-2007 G - Repair