1220 - Transmission / Live PTO G - Repair I003708 Fig. 71. I003709 Fig. 72. I003710 Fig. 73. I003711 Fig. 74. 35 T001262 Version 1 07-11-2007 In case of deviations: Change the adjusting nuts M12 above and below until the play is 0.1 mm ... 0.2 mm . Press in the piston rod of the cylinder (226) using a vice until the hex nuts (213) are in place. (Stroke limit, switch position 1000 rpm) In case of deviations: Change the hex nuts (213) and lock them until the play is 0.1 mm ... 0.2 mm . 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 ..
1001- Check the play of the clutch body (104). Target value: 0.1 mm ... 0.2 mm (play) Remove the hoist. Unscrew the ring nut M12 (self-made). Tighten the hex nuts. Set the shift to 1000 rpm G - Repair