2000 - Overall system/engine A - General I002155 Fig. 22. Function The B091 - Sensor, water in fuel measures the water level in the water sedimentor. If the water level reaches the maxi- mum, the water forms a contact across the two electrodes. That is then detected as a fault, and the signal is reported by the engine control unit via the bus system to the instrument panel. and is output as the following warning message. 27 T002550 Version 1 07-09-2009 B091 W Water sedimentor Item Item Designation A Vent Bleed screw E Ws Water level If the water reaches the maximum permitted level: 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 ..
0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- N OTE : see §83 A - General Item Designation Item Designation A Drain cock Vent Bleed screw B091 Water in fuel sensor W Water sedimentor E Electrode Ws Water level