I002531 Fig. 40. I001089 Fig. 41. I001846 Fig. 42. I002583 Fig. 43. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- The heater flange is activated at temperatures below 5°C . It is preheated for approx. 1 minute. Ignition on, preheat indicator lit When the preheat indicator is extinguished, start the trac- tor ("Start readiness") B092 boost pressure/charge air temperature sensor The maximum exhaust recirculation rate is approx.
10% of the exhaust gas quantity Exhaust gas cooler for exhaust gas recirculation (wa- ter-cooled) (AK) Non-return valve "chatter valve" (R) Y094 exhaust gas recirculation actuator motor A = open Z = closed At the front of the engine max. boost pressure = approx. 1.6 bar max. temperature = approx. 110°C On the left of the engine On the left of the engine 2000 - Overall system/engine A - General At the intake pipe 38 T000815 Version 1 07-11-2007 R002 heater flange A - General