2010 - Engine/cylinder head G - Repair I002479 Fig. 1. I002480 Fig. 2. 7 T002569 Version 1 21-04-2009 FENDT 900 Vario COM3 TCD 2013 L6 V4 75° 105° Cylinder numbering (Deutz engine) The cylinders are counted starting from the flywheel. The rotational direction of the engine is to the left, when looking at the flywheel (counterclockwise). Firing sequence, 6-cylinder engine = 1 - 5 - 3 - 6 - 2 - 4 Tractor series (selection) Engine series Valve clearance (with a cold engine, tempera- ture below 80 °C) Inlet valve Exhaust valve Tractors with Deutz engine ("Common Rail" high-pressure accumulator) Note: 1. Cylinder on flywheel 1 Adjusting valves (Deutz engine) 919 .. 0101-1000 925 .. 1001- 934 ..
0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- X899.980.236.030 adjustment tool G - Repair Tractor series (selection) Engine series Valve clearance (with a cold engine, tempera- ture below 80 °C) Locknut tight- ening torque Adjustment tool Inlet valve Exhaust valve Tractors with Deutz engine ("Common Rail" high-pressure accumulator) Note: 1. Cylinder on flywheel FENDT 900 Vario COM3 TCD 2013 L6 V4 75° 105° 20 Nm X899.980.236.03 0