I002721 Fig. 2. Wapu Water pump WT V 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- Item Designation WK B077 Electr. viscous fan 7% rpm Note: See also: Therm. Thermostat N OTE : See also: Chapter 2000 Reg. A - Belt drive: Deutz TCD 2013 8 T000833 Version 1 07-11-2007 2050 - Engine/cooling A - General Component position Wapu = water pump Y095...Y 098 Y100, Y101 A - General Item Designation Item Designation Wapu Water pump B089 Water temperature sensor Note: See also: Chapter 9000 Reg.
E - Measuring and testing the B089 water temperature sensor WT Engine oil cooler (heat exchanger) K Cooler cover: Important: Do not open the cooler cover unless the engine is cold! V Coolant pre-heater (optional) T Expansion tank Coolant fill capacity: Approx. 30 l Proportion of cooling system protective agent min./max.: 35/45 Vol% Y095...Y 098 Y100, Y101 Water-cooled injector (injector valve) S034 Fill level sensor Note: See also: Chapter 9000 Reg. E - Measuring and testing S034 coolant level switch Therm. Thermostat Start of opening: 87°C Perm. constant temperature: 110°C A053 Air conditioning unit (heater stepper motor, heat exchanger) Note: See also: Chapter 9000 Reg.
E - A053 air conditioning unit (area: "Stepper" heater valve) Chapter 5500 Reg. G – Removing the air condi- tioning unit WK Water cooler (with water drain plug (A) Drulu Air compressor B077 Electr. viscous fan Engine speed/fan speed ratio: 1.2 Slip at fully engaged viscous fan: Approx. 7% Max. viscous fan speed at rated speed: 2460 rpm Note: See also: Chapter 9000 Reg. E – Measuring and testing B077 electr. viscous fan AGR Exhaust gas recirculation (exhaust gas cooler) Note: See also: Chapter 9000 Reg. E – Y094 exhaust gas recir- culation actuator motor