Fendt 900 Vario COM III — 1 Measuring fuel return pressure

If the pressure in the return line is too high, the pressure in the dispensing unit also rises. This causes too much fuel to be delivered to the high pressure pumps, which means that the pressure in the rail is above the value set by the engine control unit (A051). Therefore, if this error occurs, the return pressure must be measured and the target and actual rail pressures must be compared using SERDIA at the same time. I001583 Fig. 2. I003558 Fig. 3. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 ..

1001- Remove the banjo bolt from the return pipe, screw in banjo bolt with measuring connection 199.110.620.010 and connect a pressure gauge (-1 bar to +1.5 bar) Target pressure: 0.2-0.5 bar 2060 - Engine/fuel system E - Measuring and testing 30 T001204 Version 2 31-10-2008 E - Measuring and testing