I001583 Fig. 9. I002374 Fig. 10. Fuel pressure upstream of Y091 dispensing unit Fuel pressure downstream of Y091 dispensing unit Diesel engine not under load Idling (800 rpm) approx.6 bar (overflow valve opens) approx. 1 bar At no-load engine speed (2200 rpm) approx. 6 bar (overflow valve opens) approx. 1 bar 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- 3 Measuring fuel pressure at Y091 dispensing unit Note: Testing is carried out with diesel engine not under load.
Checking fuel pressure (low pressure) at the Y091 dispensing unit Checking fuel pressure (low pressure) upstream of Y091 dispensing unit (ZME) Screw measuring connection into the fuel filter housing. Connect pressure gauge with measuring range 0 -25 bar. Target value: ca. 6 bar to 10 bar Checking fuel pressure (low pressure) downstream of Y091 dispensing unit (ZME) Attach adapter with measuring connection downstream of the Y091 dispensing unit. Connect pressure gauge with measuring range0 bar to 25 bar. Target value: depends on engine load. Y091 dispensing unit fully energised "idle" (dispens- ing unit almost completely closed): approx.
1 bar Y091 dispensing unit de-energised "full load" (dis- pensing unit fully open): approx. 5 bar– 10 bar 2060 - Engine/fuel system E - Measuring and testing 34 T002866 Version 1 21-04-2009 E - Measuring and testing Note: Testing is carried out with diesel engine not under load. Fuel pressure upstream of Y091 dispensing unit Fuel pressure downstream of Y091 dispensing unit Diesel engine not under load Idling (800 rpm) approx.6 bar (overflow valve opens) approx. 1 bar At no-load engine speed (2200 rpm) approx. 6 bar (overflow valve opens) approx. 1 bar