Fendt 900 Vario COM III — 1 Y094 actuator unit, AGR (exhaust gas recirculation)

2400 - Engine/exhaust system A - General Due to the drop in combustion temperature, the nitrogen oxide ratio in the exhaust decreases. The A051 - ECU, engine control unit (EDC 7). controls the exhaust gas recirculation into the combustion chamber depend- ing on the engine load and speed. The maximum exhaust gas recirculation rate is approx. 10%. I001846 Fig. 3. Y094 - Actuator unit, AGR (exhaust gas recirculation) After ignition ON, the Y094 - Actuator unit, AGR (exhaust gas recirculation) moves to the exhaust flap stops, calibration. Within the stops, the A051 - ECU, engine control unit (EDC 7). controls the position of the exhaust flap depending on the engine load.

9 T002580 Version 2 05-10-2009 N OTE : If a new Y094 actuator motor is installed: Start by hooking in the mechanical linkage on the Y094 actuator motor, then switch the ignition ON, so that the Y094 actuator motor calibrates the stops of the exhaust flap. (If the ignition is turned on when the linkage is not attached, the calibration will be carried out incorrectly. The incorrect calibration can not be reset!) Functional description: Y094 - Actuator unit, AGR (exhaust gas recirculation) A Exhaust flap open Z Exhaust flap closed 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 ..

0101-1000 931 .. 1001- On left side of engine Remove cover panel. N OTE : see §157 A - General