Fendt 900 Vario COM III — 1 Switching off the injector valve (injector)

2712 - Engine/injectors E - Measuring and testing It is possible to switch the cylinders off individually with the aid of adapter cable X899.980.259.101 (short-circuit- I004022 Fig. 1.

7 T002574 Version 1 31-10-2008 Switch off injectors one after the other and observe engine running characteristics, connect corresponding pins If the engine running characteristics do not change when a cylinder is switched off, the injector in question is Use adapter cable X899.980.259.101 to connect pins at separation point X1673 / X1677 as indicated in the table Pin (at X1673) Connect to Pin Fault code Pin (at X1677) Connect to Pin Fault code 2 4 1E.1.7C 2 5 1E.1.7D 2 7 1E.1.7E 2 4 1E.1.7F 2 5 1E.1.80 2 7 1E.1.81 1 Switching off the injector valve (injector) 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 ..

1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- E - Measuring and testing is switched off: Pin (at X1673) Connect to Pin Fault code Y095 injector 1 2 4 1E.1.7C Y096 injector 2 2 5 1E.1.7D Y097 injector 3 2 7 1E.1.7E is switched off: Pin (at X1677) Connect to Pin Fault code Y098 injector 4 2 4 1E.1.7F Y100 injector 5 2 5 1E.1.80 Y101 injector 6 2 7 1E.1.81