Fendt 900 Vario COM III — 2 Functional description: front axle suspension

I001322 Fig. 2. If the lower suspension button in the multifunction armrest is depressed for approx. 5 seconds, the pressure cut-off valve (DRVF) is energised and the oil flows through the lower suspension non-return valve (RVFS) at a pressure of 100 bar to the piston rod side of the suspension cylinder. The pressure generated in the line upstream of the lower suspension non- return valve (RVFS) hydraulically deflects the raise suspension non-return valve (RVFH) and releases the line from the pis- ton side to the tank. The lowering operation continues for as long as the button is depressed.

Tractors with a 2-circuit brake system have a wobble stabiliser solenoid valve (MVFW) installed as standard (optional for 1-circuit brake systems). The solenoid valve is energised from a speed of 25 km/h and switches to locked mode. This severs the link between the piston ends of the two suspension cylinders and no further oil is exchanged. The lock pre- vents the tractor from "wobbling". Below a speed of 15 km/h, the solenoid valve is de-energised and switched to flow mode. If the lower suspension button in the multifunction armrest is briefly depressed, the lock suspension solenoid valve (MVFF) is energised and switches to locked mode.

This severs the connection between the piston ends of the two sus- pension accumulators (ASP1 +ASP2) and the suspension cylinder, causing the suspension to become "hard", i.e. no lon- ger dampened. The suspension can only be locked at speeds below 15 km/h. At higher speeds, the valve switches back to flow and the suspension is reactivated. 919 .. 0101-1000 925 .. 1001- 934 .. 0101-1000 919 .. 1001- 928 .. 0101-1000 934 .. 1001- 922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 .. 1001- 3000 - Overall system/front axle A - General 10 T000443 Version 2 21-04-2009 Lower suspension Wobble stabiliser Lock suspension A - General