922 .. 0101-1000 928 .. 1001- 922 .. 1001- 931 .. 0101-1000 925 .. 0101-1000 931 ..
1001- 0000 - Overall system/tractor B - Faults 05-10-2009 Valve position not func- 0A.1.B9 A039 - MFA, multifunction armrest Linear module 2 (rocker) faulty or Fault code DIN brief description Cause Consequences Reference FENDIAS/Note 86 Fault code DIN brief description Cause Consequences Reference FENDIAS/Note 0A.1.B9 A039 - MFA, multifunction armrest Linear module 2 (rocker) faulty or engaged when ignition switched on Valve position not func- tioning, lock valve 0A.1.BA A039 - MFA, multifunction armrest Linear module 3 (rocker) not cali- brated Valve position not func- tioning Calibration code "1005" 0A.1.BB A039 - MFA, multifunction armrest Linear module 3 (rocker) faulty or engaged when ignition switched on Valve position not func- tioning, lock valve 0A.1.BC A039 - MFA, multifunction armrest Linear module 4 (rocker) not cali- brated Valve position not func- tioning Calibration code "1006" 0A.1.BD A039 - MFA, multifunction armrest Faulty linear module 4 (rocker) Valve position not func- tioning, lock valve 0A.1.C0 A039 - MFA, multifunction armrest MFA not fitted No auto mode, Valve locked 0A.1.C1 A039 - MFA, multifunction armrest A050 - ECU, basic control unit MFA GD fault in button used by hydraulics Valve locked 0A.1.C2 A039 - MFA, multifunction armrest Faulty MFA button (general locking) Total lock not possible, valves locking 0A.1.C5 A039 - MFA, multifunction armrest Faulty MFA button (switching function) No switching function possible, switching func- tion maintained prior to error 0A.1.CA A050 - ECU, basic control unit Steering axle checksum incorrect Steering axle deactiva- tion EOL programming 0A.1.CB A050 - ECU, basic control unit Steering axle active Warning message only 0A.1.CC A050 - ECU, basic control unit Steering axle not active Warning message only 0A.1.CE Auxiliary control units Valve actuator does not return to neutral position Valve remains deflected when engine is on, valve locks, pilot pressure OFF 0A.1.CF Auxiliary control units Floating position is not reached Valve moves to neutral and locks 0A.1.D0 A039 - MFA, multifunction armrest Button, hydraulic circuit 3 Faulty button, Signal fault Button inoperable until next trouble-free cold start