0-12 SAFETY INSTRUCTION MH6.6 / MH8.6 Parking the machine safely Preventing accidents when the machine is moving To prevent accidents: - Park on a flat, horizontal surface. Severe or fatal accidents may result from an attempt to enter or leave a moving machine. - Turn the brake switch to braking position. - Set the working equipment down on the ground. - Before leaving the operator’s seat, select a flat, horizontal area for parking if possible. - Lower the levelling blade and/or the outrigger claws onto the ground. - Park the machine safely. - Block both wheels and set the working equipment down on the ground. - Engage the superstructure lock.
- Run the engine unloaded at mini- mum speed for ca. 5 minutes. - Park at a reasonable distance from other vehicles. - Turn the ignition key to OFF posi- tion to switch off the engine. Then withdraw the key. - Move the steering safety lever to block the machine. - Lock the windows, the sliding roof and the cab door. - Lock all covers and flaps. Fig. 18 Confirming the direction of machine travel Inadvertent activation of the operat- ing pedal may result in severe damage or fatal accidents. Check the machine position. Read the corresponding section in the Owner’s Manual. Fig. 17 Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)